<tfoot id="saumy"></tfoot>
|
|
This line is mainly designed to blank for LPG cylinder and automatic stamping for other metal products.It not only can effectively reduce material consuming,but also increase product efficiency.Further,it can proceed the technic of stamping towards the direction of automation and modernization.
Main specification:
Thickness of steel plate | 2~4mm |
Width of steel plate | ≤1250mm |
Inner/outer diameter of coll | Φ(450~800)mm≤Φ1600mm |
Weight of coil | ≤15T |
Cycle period of stamping | 2片/6秒 2PCS/6 seconds |
Size of stamping | Φ540~Φ620mm |
Impact of stamping | 3150KN×2 or 2000KN×2 |
Distance between working table ahd floor | 1000mm |
Total gas appiy rate | 0.26m3/min |
Pressure of compress air | 0.6MPa |
Total power required | 73KW |
Required area(length×width) | 23×7m |
Copyright 2015 taizhou LinHua machinery manufacturing co., LTD. All rights reserved All rights reserved. Technique support: taizhou Shoujia network company
